ViewSonic PJD6543w Guía de usuario Pagina 30
- Pagina / 90
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
25
Switching input signal
The projector can be connected to multiple devices at the same time. However, it can only
display one full screen at a time.
Be sure the Quick Auto Search function in the SOURCE menu is On if you want the
projector to automatically search for the signals.
You can also manually select the desired signal by
pressing one of the source selection keys on the
remote control, or cycle through the available input
signals.
1. Press SOURCE on the projector or remote
control. A source selection bar is displayed.
2. Press / until your desired signal is
selected and press MODE/ENTER on the
projector or Enter on the remote control.
Once detected, the selected source information
will be displayed on the screen for seconds. If
there are multiple devices connected to the
projector, repeat steps 1-2 to search for another
signal.
• The brightness level of the projected image will change accordingly when you switch
between different input signals. Data (graphic) "PC" presentations using mostly static
images are generally brighter than "Video" using mostly moving images (movies).
• The input signal type effects the options available for the Color Mode. See "Selecting a
picture mode" on page 31 for details.
• Please see "Projector specifications" on page 65 for the native display resolution of this
projector. For best display picture results, you should select and use an input signal
which outputs at this resolution. Any other resolutions will be scaled by the projector
depending upon the 'aspect ratio' setting, which may cause some image distortion or loss
of picture clarity. See "Selecting the aspect ratio" on page 28 for details.
Changing HDMI input settings
In the unlikely event that you connect the projector to a device (like a DVD or Blu-ray
player) via the projector’s HDMI input and the projected picture displays wrong colors,
please change the color space to an appropriate one that fits the color space setting of the
output device.
To do this:
1. Open the OSD menu and go to the SOURCE menu.
2. Press to highlight HDMI Format and press / to select a suitable color space
according to the color space setting of the output device connected.
• RGB: Sets the color space as RGB.
• YUV: Sets the color space as YUV.
• Auto: Sets the projector to detect the color space setting of input signal
automatically.
3. Press to highlight HDMI Range and press / to select a suitable HDMI color
range according to the color range setting of the output device connected.
• Enhanced: Sets the HDMI color range as 0 - 255.
D-Sub / Comp. 1
Video
S-Video
D-Sub / Comp. 2
HDMI
- PJD6235/PJD6245/PJD6543w 1
- DLP Projector 1
- Compliance Information 2
- Important Safety Instructions 3
- Copyright Information 5
- Product Registration 5
- Table of contents 6
- Important safety instructions 7
- Introduction 9
- Shipping contents 10
- Projector exterior view 11
- Controls and functions 12
- Remote control 13
- Remote control code 14
- Positioning your projector 17
- Projection dimensions 18
- PJD6543w 19
- Connection 20
- Connecting a computer 21
- Connecting a monitor 21
- Best video quality 22
- Better video quality 22
- Least video quality 22
- Connecting audio 22
- Connecting an HDMI device 23
- Operation 25
- Using the menus 26
- Setting a password 27
- If you forget the password 27
- Changing the password 28
- Switching input signal 30
- Adjusting the projected image 31
- Correcting keystone 32
- Selecting the aspect ratio 33
- About the aspect ratio 34
- 16:9 picture 35
- Optimizing the image 36
- Using Screen Color 37
- Color Management 39
- Hiding the image 41
- Locking control keys 41
- Freezing the image 41
- Using the CEC function 42
- Using the 3D functions 42
- Category Item Input Length 46
- Maximum Number 46
- You can press 47
- to reveal 47
- Maximum Number of 48
- Characters 48
- Press Exit to 49
- Shutting down the projector 51
- Menu operation 52
- Main menu Sub-menu Options 53
- SETTING: 54
- ADVANCED 54
- INFORMATION 55
- Description of each menu 56
- Maintenance 62
- Lamp information 63
- Timing of replacing the lamp 64
- Replacing the lamp 65
- Resetting the lamp timer 67
- Indicators 68
- Troubleshooting 69
- Specifications 70
- Output terminal 71
- Control terminal 71
- Environmental Requirements 71
- Dimensions 72
- Ceiling mount installation 72
- Timing chart 73
- Copyright information 76
- Appendix 77
- RJ45 response table 79
- RS232 command table 79
- Customer Support 85
- Limited Warranty 86
- Mexico Limited Warranty 88
- VSC_TEMP_2006 89
Relacionado con productos y manuales para Proyectores de datos ViewSonic PJD6543w
Proyectores de datos ViewSonic PJ359 Guía de usuario
(72 paginas)
(72 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.188 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales